Saramonic UwMic9 Wireless Audio Transmitter Complete

Receiver
The Saramonic UwMic9-RX9 is an integrated camera-mounted wireless receiver. It features wide switching RF bandwidth, an easy-to-read LCD display, and infrared synchronization between transmitter and receiver.
Equipped with an auto scan function, the RX9 can automatically search for an available broadcast frequency. The headphone jack allows for real-time monitoring or the receiver through headphones, especially useful for cameras that lack a monitor output.

Transmitter (x2)
This compact transmitter employs a crystal controlled PLL synthesizer. It is equipped with a muting function and a BMP type microphone input. The RF power output can be switched between high, medium and low.
The camera-mount system’s RX9 receiver features wide switching RF bandwidth and an easy-to-read LCD display. It is built with infrared synchronization between the transmitter and receiver, an auto-scan function and can search for an available transmission frequency. The headphone jack provides real-time monitoring with headphones, which is useful for cameras that lack a monitor output.
The two compact transmitters employ a crystal-controlled PLL synthesizer and are equipped with a muting function. Its RF power output can be switched between high, medium and low settings. Additionally, each transmitter is built with a 1/8″ type microphone input. Also, included with this system are two lavalier microphones, a shoe mount adapter, a single 1/8″ output cable to XLR and a single 1/8 to 1/8″ output cable.

Receiver

• Dual channel channels available
• Frequencies 96, group A & B
• PLL synthesizer oscillator type
• 1/8″ (3.5mm) Jack audio output connector
• 1/4 wave antenna with cable
• Audio output level -60 dBV
• Headphone output level 30 mW (16 Ohms)
• Reception frequency 514 to 596 MHz
• Reception sensitivity -95 dBm
• Signal to Noise Ratio 70 dB or more
• Voice delay 12 ms
• Reference deviation ±5 kHz (-60 dBV, 1 kHz input)
• Frequency response 40 Hz to 18 kHz (±3 dB)
• Distortion 0.5% or less
• Spurious and Harmonic Suppression -60 dB
• Batteries Two AA size batteries
• Dimensions 6.7 x 2.5 x 1.2″ (17 x 6.4 x 3.0 cm)
• Approximate weight. 7.72 oz (219 g) without batteries

Transmitter

• Channels 96, group A & B
• PLL synthesizer oscillator type
• Audio carrier frequencies 514 to 596 MHz
• Reference deviation ±5 kHz (-60 dBV, 1 kHz input)
• Signal to Noise Ratio 70 dB or more
• Spurious and Harmonic Suppression -60 dB
• Voice delay 12 ms
• 1/4 wave antenna with cable
• 1/8″ (3.5mm) Jack Audio Input Connectors
• Audio input -60 dBV (MIC input, 0 dB attenuation)
• RF output level 30 mW / 20 mW / 10 mW selectable
• Battery 2 AA size batteries
• Operating Temperature 32 to 122°F (0 to 50°C)
• Storage temperature -4 to 131°F (-20 to +55°C)
• Distortion 0.5% or less
• Dimensions 6.7 x 2.5 x 1.2″ (17 x 6.3 x 3.0 cm)
• Weight Approximately 7.41 g (211.4 g) without batteries