Eli Smith Eli Smith's Profile Page

Eli Smith Eli Smith

0 Course Enrolled • 0 Course Completed

Biography

FSCP試験の準備方法｜最新のFSCP日本語版試験｜検証するForescout Certified Professional Exam技術内容

FSCP認定資格を取得して認定資格を取得すると、将来の雇用と開発がある程度決まるため、FSCP試験ガイドは競争力のある従業員になるために尽力しています。家に戻っても問題ありません。実際、FSCP試験に合格するための最良の方法は近視であるとFSCPのテスト準備を考えてください。彼らはこれを達成できるだけでなく、より多くのコンテンツを同時に覚えることができます。

FSCPテストガイドの言語は理解しやすいため、学習障害のない学習者は、学生であろうと現職のスタッフであろうと、初心者であれ、多くの経験豊富な経験豊富なスタッフであれ、年。 FSCP試験問題は、教育レベルに依存しないすべての分野のすべての人に適用されます。したがって、困難なテストを通過するためにFSCPガイドトレントを選択して合格することは素晴らしい素晴らしいアイデアです。

>> FSCP日本語版 <<

FSCP試験の準備方法｜信頼できるFSCP日本語版試験｜最高のForescout Certified Professional Exam技術内容

GoShikenは、試験の準備をしている人に最適です。 Forescout私たちの実際のFSCPテストを使用した後、多くの人が良い成績を獲得しているので、あなたも良い結果を楽しむでしょう。当社の無料デモでは、世界で発生している最新のFSCPポイントを追跡できるように、1年間無料で更新できます。Forescout Certified Professional Exam 試験の急流の試験の質問は多かれ少なかれ白熱した問題に関係しており、試験の準備をする顧客は一日中試験のForescout痕跡を保持するのに十分な時間がない必要があるので、Forescout Certified Professional Exam私たちの模擬試験はあなたにとって助けになるツールとしてFSCP役立ちます無視したホットポイントを補います。

Forescout FSCP 認定試験の出題範囲：

トピック
出題範囲

トピック 1

プラグインチューニング HPS: 試験のこのセクションでは、プラグイン開発者とエンドポイント統合エンジニアのスキルを測定し、ホストプロパティスキャナー (HPS) プラグインのチューニング (エンドポイントのプロファイル作成、スキャンロジックの調整、例外の処理、適用のための正確なホスト属性収集の確保など) について扱います。

トピック 2

プラグインチューニングユーザーディレクトリ: 試験のこのセクションでは、ディレクトリサービスインテグレーターと ID エンジニアのスキルを測定し、ユーザーディレクトリと統合するプラグインのチューニング (構成、ディレクトリ属性のプラットフォームポリシーへのマッピング、パフォーマンスに関する考慮事項、セキュリティ上の影響など) をカバーします。

トピック 3

高度なトラブルシューティング: 試験のこのセクションでは、運用リーダーと上級テクニカルサポートエンジニアのスキルを測定し、表面的な修正だけでなく、コンポーネントの相互作用、ポリシー適用の失敗、プラグインの誤動作、根本原因の分析と修正戦略を必要とするエンドツーエンドのワークフローにわたる複雑な問題の診断をカバーします。

トピック 4

FSCA トピックの概説：このセクションでは、ネットワークセキュリティエンジニアとシステム管理者のスキルを測定します。アーキテクチャ、資産の識別、初期導入時の考慮事項など、プラットフォームの基本的な概念を幅広く網羅しています。より高度な分野に進む前に、関連するベースライントピックに精通していることを確認します。| ポリシーのベストプラクティス：このセクションでは、セキュリティポリシーアーキテクトと運用管理者のスキルを測定します。堅牢なポリシーを効果的に設計および適用する方法を取り上げ、技術的な構成だけでなく、保守性、明確性、組織目標との整合性を重視します。

トピック 5

カスタマイズされたポリシーの例: 試験のこのセクションでは、セキュリティアーキテクトとソリューション配信エンジニアのスキルを測定し、シナリオベースのポリシー設計と実装をカバーします。ビジネスケースの要件を理解し、カスタマイズされたポリシーフレームワークを作成し、例外的なデバイスやワークフローに合わせて調整し、コンテキスト内でそれらのカスタマイズを文書化または検証する必要があります。

トピック 6

高度な製品トピックのライセンス、拡張モジュール、冗長性: 試験のこのセクションでは、製品導入リーダーとソリューションエンジニアのスキルを測定し、ライセンスモデル、オプションのモジュールまたは拡張機能、高可用性または冗長性の構成、それらがアーキテクチャと運用の準備にどのように影響するかなどのトピックをカバーします。

トピック 7

ポリシー機能: 試験のこのセクションでは、ポリシー実装者と統合スペシャリストのスキルを測定し、依存関係、ルールの順序、適用トリガー、デバイス分類および動的属性との相互作用など、プラットフォーム内でのポリシーの動作をカバーします。

トピック 8

高度な製品トピックの証明書と ID 追跡: 試験のこのセクションでは、ID およびアクセス制御のスペシャリストとセキュリティエンジニアのスキルを測定し、デジタル証明書の管理、PKI 統合、ID 追跡メカニズム、およびそれらがシステム内での適用と監査機能をどのようにサポートするかをカバーします。

トピック 9

通知: 試験のこのセクションでは、監視およびインシデント対応の専門家とシステム管理者のスキルを測定し、アラートとレポートがインシデントのワークフローと関係者のコミュニケーションに結びつくように、通知がどのように構成、トリガー、ルーティング、および管理されるかをカバーします。

Forescout Certified Professional Exam 認定 FSCP 試験問題 (Q12-Q17):

質問 # 12
Which of the following properties can be determined by the HPS Plugin? (Choose two)

A. AD group membership
B. Operating System
C. Application installed on Mac OS
D. HTTP banner
E. External Device on Windows

正解：B、D

解説：
Comprehensive and Detailed Explanation From Exact Extract of Forescout Platform Administration and Deployment:
According to the Forescout HPS Inspection Engine Configuration Guide and HPS Applications Plugin documentation, the properties that can be determined by the HPS Plugin are: Operating System (C) and HTTP banner (E).
HPS Plugin Capabilities:
According to the HPS Inspection Engine guide:
"The HPS (Host Property Scanner) Inspection Engine provides host properties for detecting endpoint characteristics including operating system, services, and applications." The HPS plugin determines:
* Operating System - OS type, version, service pack level
* HTTP Banner - Service versions from HTTP banner scanning
* Services and Applications - Running processes and installed software
* System Information - Hardware vendor, NIC vendor, etc.
Operating System Detection:
According to the HPS Applications Plugin guide:
"Windows operating system information is detected by the HPS Applications Plugin, including: Release, Package/flavor, Service Pack" The plugin detects:
* Windows OS versions (XP, Vista, 7, 8, 10, etc.)
* Server editions (2003, 2008, 2012, 2016, etc.)
* Service pack levels
* OS build information
HTTP Banner Detection:
According to the HPS Inspection Engine guide:
"Service Banner: Indicates the service and version information, as determined by Nmap. HTTP banner scanning returns service identification information." The HTTP banner property is resolved by NMAP scanning with the -sV parameter, which is part of the HPS plugin's classification capabilities.
Why Other Options Are Incorrect:
* A. Application installed on Mac OS - The HPS Applications Plugin is for Windows applications only; it does not detect Mac OS applications
* B. External Device on Windows - External Device detection is a separate property unrelated to HPS plugin discovery
* D. AD group membership - This is determined by the User Directory plugin via LDAP, not the HPS plugin HPS Plugin vs. Other Plugins:
According to the documentation:
Property
HPS Plugin
Other Plugins
Operating System
#Yes
N/A
HTTP Banner
#Yes (NMAP)
N/A
Windows Applications
#Yes
N/A
AD Group Membership
#No
User Directory
Mac OS Applications
#No
macOS-specific
External Devices
#No
Network discovery
Referenced Documentation:
* CounterACT Endpoint Module HPS Inspection Engine Configuration Guide v10.8
* CounterACT HPS Applications Plugin Configuration Guide v2.1.4
* About the HPS Applications Plugin

質問 # 13
What should you do first when preparing for an upgrade to a new CounterACT version?

A. Upgrade only the modules compatible with the version you are installing.
B. Upgrade the members first before upgrading the EM.
C. Consult the CounterACT Release Notes for the appropriate version
D. Upgrading an appliance is done through Options/Modules.
E. From the appliance CLI, fstool upgrade /tmp/counteract-v8.0.1.fsp

正解：C

解説：
Comprehensive and Detailed Explanation From Exact Extract of Forescout Platform Administration and Deployment:
According to the Forescout Upgrade Guides for multiple versions, the first thing you should do when preparing for an upgrade to a new CounterACT version is consult the CounterACT Release Notes for the appropriate version.
Release Notes as First Step:
According to the official documentation:
"Review the Forescout Release Notes for important information before performing any upgrade." The documentation emphasizes this as a critical first step before any other upgrade activities.
What Release Notes Contain:
According to the upgrade guidance:
The Release Notes provide essential information including:
* Upgrade Paths - Which versions you can upgrade from and to
* Pre-Upgrade Requirements - System requirements and prerequisites
* End-of-Life Products - Products that must be uninstalled before upgrade
* Non-Supported Products - Products not compatible with the new version
* Module/Plugin Dependencies - Version compatibility requirements
* Known Issues - Potential problems and workarounds
* Upgrade Procedures - Step-by-step instructions
* Rollback Information - How to revert if needed
Critical Pre-Upgrade Information:
According to the Release Notes guidance:
"The upgrade process does not continue when end-of-life products are detected." Release Notes list:
* End-of-Life (EOL) Products - Must be uninstalled before upgrade
* Non-Supported Products - Must be uninstalled before upgrade
* Plugin Version Compatibility - Which plugin versions work with the new Forescout version Upgrade Order vs. Release Notes Review:
According to the documentation:
While the order of upgrade (EM first, then Appliances) is important, consulting Release Notes comes FIRST because it determines what needs to be done before any upgrade attempts.
The Release Notes tell you:
* Whether you can upgrade at all
* What must be uninstalled
* System requirements
* Compatibility information
Only AFTER reviewing Release Notes do you proceed with the actual upgrade sequence.
Why Other Options Are Incorrect:
* A. Upgrade the members first before upgrading the EM - This is the OPPOSITE of correct order; EM (Enterprise Manager) should be upgraded first
* B. Upgrading an appliance is done through Options/Modules - This is not the upgrade path; upgrades are done through Tools > Options > CounterACT Devices
* C. From the appliance CLI, fstool upgrade /tmp/counteract-v8.0.1.fsp - This is ONE possible upgrade method, but not the first step; downloading and reviewing Release Notes comes first
* E. Upgrade only the modules compatible with the version you are installing - This is a consideration found IN the Release Notes, not the first step itself Correct Upgrade Sequence:
According to the comprehensive upgrade documentation:
text
1. FIRST: Review Release Notes (determine what's needed)
2. Second: Check system requirements
3. Third: Uninstall EOL/non-supported products
4. Fourth: Back up Enterprise Manager and Appliances
5. Fifth: Upgrade Enterprise Manager
6. Sixth: Upgrade Appliances
Referenced Documentation:
* Before You Upgrade the Forescout Platform - v8.3
* Before You Upgrade the Forescout Platform - v9.1.2
* Forescout 8.1.3 Release Notes
* Installation Guide v8.0 - Upgrade section

質問 # 14
Which of the following is true when setting up an Enterprise Manager as a High Availability Pair?

A. Connect devices to the network and to each other.
B. If HA reboots, this is an indication of a problem.
C. Set up HA on the Secondary node first.
D. HA requires a license.
E. HA needs to be manually configured on the secondary appliance in order to sync correctly.

正解：D

解説：
Comprehensive and Detailed Explanation From Exact Extract of Forescout Platform Administration and Deployment:
According to the Forescout Resiliency Solutions User Guide and the Forescout Platform Installation Guide, High Availability (HA) requires a license. The documentation explicitly states:
"If your deployment is using Centralized Licensing Mode, you must acquire a valid ForeScout CounterACT Resiliency license. The Resiliency license supports: High Availability Pairing for Enterprise Manager is supported by the Forescout CounterACT See License." High Availability Licensing Requirements:
According to the official documentation:
Per-Appliance Licensing Mode:
"The demo license for your High Availability system is valid for 30 days. You must install a permanent license before this period expires." Centralized Licensing Mode:
"If your deployment is using Centralized Licensing Mode, you must acquire a valid ForeScout CounterACT Resiliency license for Appliances, or a CounterACT See License for Enterprise Manager High Availability Pairing." License Usage Considerations:
According to the documentation:
* "You should use the IP address of the High Availability pair when requesting a High Availability license"
* "If a license is only issued to the Active node in a High Availability pair, the system may not operate after failover to the Standby node"
* "Both nodes must be up when requesting a license"
Why Other Options Are Incorrect:
* A. If HA reboots, this is an indication of a problem - According to the documentation, reboots can occur during the setup process: "Following the second reboot in the high availability setup, allow time for data synchronization" - this is normal, not an indication of a problem
* B. Set up HA on the Secondary node first - Incorrect order. According to the documentation, "Before you begin setting up the Secondary node Forescout Platform device, verify that the Primary node Forescout Platform device is powered on" - the Primary node must be set up first
* C. Connect devices to the network and to each other - While devices must be connected, this is a general infrastructure requirement, not specific to HA setup. The more specific requirement is licensing
* D. HA needs to be manually configured on the secondary appliance in order to sync correctly - According to the documentation, the Secondary node configuration uses a setup process that is distinct from the Primary node: "When setting up the Secondary node device, use the same sync interfaces and netmask settings used in the Primary node device" - this is guided setup, not manual configuration for sync High Availability Setup Process:
According to the documentation:
* Set up Primary Node - "Select High Availability mode: 1) Standard Installation 2) High Availability - Primary Node"
* Set up Secondary Node - "Set up a device as the secondary node" (secondary node connects to primary automatically)
* Licensing - "You must install a permanent license before this period expires" Referenced Documentation:
* Forescout Resiliency Solutions User Guide (v8.0)
* Forescout Installation Guide v8.1.x
* Forescout Resiliency and Recovery Solutions User Guide v8.1
* Set up and configure a device as the primary node
* Set up a device as the secondary node

質問 # 15
Which of the following is true regarding the Windows Installed Programs property which employs the "for any
/for all" logic mechanism?

A. The condition does not have any sub-properties. The "any/all" refers to the multiple programs.
B. Although the condition has sub-properties which could refer to a single program on multiple endpoints, the "any/all" refers to the program's properties.
C. Although the condition has multiple sub-properties, the "any/all" refers to the programs and not the sub- properties.
D. Although the condition has multiple sub-properties, the "any/all" refers to the sub-properties and not the programs.
E. Although the condition has multiple sub-properties, when "ANY" is selected it evaluates the programs for any of the configured sub-properties.

正解：C

解説：
Comprehensive and Detailed Explanation From Exact Extract of Forescout Platform Administration and Deployment:
The Windows Installed Programs property condition utilizes multiple sub-properties including Program Name, Program Version, Program Vendor, and Program Path. However, when using the "for ANY/for ALL" logic mechanism, the "any/all" refers to the PROGRAMS and not to the sub-properties.
How the "Any/All" Logic Works with Windows Installed Programs:
When configuring a policy condition with the Windows Installed Programs property, the "any/all" logic determines whether an endpoint should match the condition based on:
* "For ANY" - The endpoint matches the policy condition if ANY of the configured programs are installed on the endpoint
* "For ALL" - The endpoint matches the policy condition if ALL of the configured programs are installed on the endpoint Example: If an administrator creates a condition like:
* Windows Installed Programs contains "Microsoft Office" OR "Adobe Reader"
* Using "For ANY": The endpoint matches if it has EITHER Microsoft Office OR Adobe Reader installed
* Using "For ALL": The endpoint matches only if it has BOTH Microsoft Office AND Adobe Reader installed The sub-properties (Program Name, Version, Vendor, Path) are used to define and identify which specific programs to match against, but the "any/all" logic applies to the PROGRAMS themselves, not to the sub- properties.
Why Other Options Are Incorrect:
* A - Incorrectly states the "any/all" evaluates the programs for the sub-properties
* B - Factually incorrect; the condition definitely has multiple sub-properties (Name, Version, Vendor, Path)
* C - Confuses the scope; the "any/all" does not refer to "program's properties" but to multiple programs
* D - Inverted logic; the "any/all" refers to the programs, not the sub-properties Referenced Documentation:
* Forescout Administration Guide v8.3, v8.4
* Working with Policy Conditions - List of Properties by Category
* Windows Applications Content Module Configuration Guide

質問 # 16
Place the DNS Enforce control actions into the correct workflow order for endpoints which have a pending control action.

正解：

解説：

質問 # 17
......

ForescoutのFSCP認定試験を除いて、最近非常に人気がある試験はまたForescout、Cisco、IBM、SAPなどの様々な認定試験があります。しかし、もしFSCP認証資格を取りたいなら、GoShikenのFSCP問題集はあなたを願望を達成させることができます。試験の受験に自信を持たないので諦めることをしないでください。GoShikenの試験参考書を利用することを通して自分の目標を達成することができますから。FSCP認証資格を入手してから、他のIT認定試験を受験することもできます。GoShikenの試験問題集を手にすると、どのような試験でも問題ではありません。

FSCP技術内容: https://www.goshiken.com/Forescout/FSCP-mondaishu.html

Eli Smith Eli Smith

Biography

Book for a session now!

+233 - 30277 - 1472